Centrifuges

Mini-centrifuge/vortex Micro–Spin FV-2400 is specially designed for genetic engineering research (for PCR–diagnostics experiments). Units can be used in microbiological, biochemical, clinical laboratories and industrial biotechnological laboratories.

Micro–Spin provides simultaneous mixing and separation of samples, using centrifuge and mixing modules, located on the common spin–module.

FV-2400 is an “open type” centrifuge (without lid), that increases the speed of centrifugation and resuspension operations.

Specification

Rotation speed (fixed) (50 Hz): 2800 rpm

Max. RCF (50 Hz): 500 x g

Rotation speed (fixed) (60 Hz): 3500 rpm

Max. RCF (60 Hz): 700 x g

Continuous and impulse operation modes: +

Overall dimensions (W×D×H): 120x170x120 mm

Weight: 1.4 kg

Power consumption (230V / 120 V): 25 W (0.1 A) / 30 W (0.27 A)

Nominal operating voltage: 120 or 230 V; 50/60 Hz

Mini-centrifuge/vortex Combi–Spin FVL-2400N is specially designed for genetic engineering research (for PCR–diagnostics experiments). Units can be used in microbiological, biochemical, clinical laboratories and industrial biotechnological laboratories.

Combi–Spin provides simultaneous mixing and separation of samples, using centrifuge and mixing modules, located on the common spin–module.

FVL-2400N is provided with protection mechanism that stops the rotor motion when the lid is opened.

Specification

Rotation speed (fixed) (50 Hz): 2800 rpm

Max. RCF (50 Hz): 500 x g

Rotation speed (fixed) (60 Hz): 3500 rpm

Max. RCF (60 Hz): 700 x g

Continuous and impulse operation modes: +

Safety: Stop at open lid

Overall dimensions (W×D×H): 190x235x125 mm

Weight: 1.7 kg

Power consumption (230V / 120 V): 25 W (0.1 A) / 30 W (0.27 A)

Nominal operating voltage: 120 or 230 V; 50/60 Hz

Centrifuge/vortex Multi–Spin MSC-3000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin). We named this repetitive algorithm of operation that is aimed at reducing the mistakes during sample preparation for PCR analysis a “sms–algorithm”.

Multi–Spin is a fully automatic device for reproducing sms–algorithm for 12 tubes at one time, thus saving time considerably. A must-have instrument for PCR and DNA analyses laboratory.

Multi Spin is four devices combined in one:

1. Centrifuge — Maximum RCF: up to 800 × g
2. Vortex (3 mixing modes — soft, medium, hard; regulated time; Vortexing regulation timer 1–20 sec)
3. Centrifuge/Vortex;
4. SMS–cycler for realization of the “sms–algorithm”.

Table to the right compares FVL-2400N, MSC-3000 and MSC-6000

Multi–Spin allows considerable time saving compared to Combi–Spin by automatically performing cycling program of sample mixing and spinning according to the set spin–mix–spin cycle for 12 microtubes simultaneously.

Specification

Speed control range: 1000–3500 rpm (increment 100 rpm)

RCF max.: 800 x g

Spin timer: 1 s – 99 min

Vortexing intensity: Soft, medium, hard

Vortexing time: 0–20 s (increment 1 s)

SMS-cycle regulation: 1 - 999 cycles

Timer sound signal: +

Display: LCD, 2 x 16 signs

Safety: Autostop at open lid

Overall dimensions (W×D×H): 190x235x125 mm

Weight: 2.1 kg

Input current/power consumption: 12 V, 11 W (0.9 A )

External power supply: Input AC 100–240 V; 50/60 Hz; Output DC 12 V

Centrifuge/vortex Multi–Spin MSC-6000 is product of many years evolution of Spin–Mix–Spin technology that is intended for collecting micro volumes of reagents on the microtube's bottom (first centrifugation spin), following mixing (mix) and collecting the  reagents again from the walls and cap of the microtube (second spin). We named this repetitive algorithm of operation that is aimed at reducing the mistakes during sample preparation for PCR analysis a “sms–algorithm”.

Multi–Spin is a fully automatic device for reproducing sms–algorithm for 12 tubes at one time, thus saving time considerably. A must-have instrument for PCR and DNA analyses laboratory.

Multi Spin is four devices combined in one:

1. Centrifuge — Maximum RCF: up to 2350 × g
2. Vortex (3 mixing modes — soft, medium, hard; regulated time; Vortexing regulation timer 1–20 s)
3. Centrifuge/Vortex;
4. SMS–cycler for realization of the “sms–algorithm”.

Table on the right compares FVL-2400N, MSC-3000 and MSC-6000

Multi–Spin allows considerable time saving compared to Combi–Spin by automatically performing cycling program of sample mixing and spinning according to the set spin–mix–spin cycle for 12 microtubes simultaneously.

Specification

Speed control range: 1000–6000 rpm (increment 100 rpm)

RCF max.: 2350 x g

Spin timer: 1 s - 30 min

Vortexing intensity: Soft, medium, hard

Vortexing time: 0–20 s (increment 1 s)

SMS-cycle regulation: 1 - 999 cycles

Timer sound signal: +

Display: LCD, 2 x 16 signs

Safety: Lid lock

Overall dimensions (W×D×H): 190x235x125 mm

Weight: 2.5 kg

Input current/power consumption: 24 V, 24 W (1 A)

External power supply: Input AC 100–240 V; 50/60 Hz; Output DC 24 V

Laboratory bench-top centrifuge with refrigeration LMC-4200R provides temperature control of biomaterial during centrifugation. Temperature control of the so-called “cold-shelf” is a gold standard for enzymologists and cell biologists because it ensures conditions necessary for reproducibility of the sample preparation stage. Temperature control absence at this stage can cause unpredictable results.

LMC-4200R is a modern centrifuge designed for operation with microtest plates, gel cards and tubes from 10 to 50 ml.

Features:

• Soft start and run-down of the rotor;
• Efficient rate of chamber refrigeration: under 10 min;
• Maintenance of stable temperature during operation;
• User-friendly setting of centrifugation parameters (speed, temperature, time) and simultaneous display of both set and actual values;
• Safe operation is provided by a metal protection chamber and a case cover, automatic stop at imbalance (emergency shutdown,  "IMBALANCE" displayed) and a lock keeping the lid closed while the centrifuge is running.
• Rotor selection;
• Setting rotor speed in RPM or RCF;
• Multiple acceleration (Slow, Normal, Fast) and deceleration (0, Slow, Normal, Fast) modes and possibility to switch off forced braking;
• Low noise level;
• Wide choice of accessory rotors.

Specification

Temperature control range: –10°C ... +25°C

Stable temperature maintenance range: 25°C below ambient ... to +25°C

Temperature setting resolution: 1°C

Speed regulation range for centrifuge tubes: 100–4200 rpm (3160 × g)

Speed regulation range for microtitre plates: 100–2000 rpm (560 × g)

Speed setting resolution: 100 rpm

Digital time setting: 1–90 min (increment 1 min)

Timer sound signal: +

Rotor imbalance diagnostics (automatic stop, “IMBALANCE” warning): +

Slowdown time, not more: 30 s

Display: LCD, 2 lines

Chamber diameter: 360 mm

Overall dimensions (W×D×H): 635x580x335 mm

Weight: 56 kg

Nominal operating voltage: 230 V, 50 Hz

Power consumption (230 V): 990 W (4.3 A)